EEV Arrow Design Package and Print Files

[featured_image]
Download
Download is available until [expire_date]
  • Version
  • Download 57
  • File Size 8.90 MB
  • File Count 1
  • Create Date August 18, 2021
  • Last Updated January 14, 2022

EEV Arrow Design Package and Print Files

This download is a compressed folder containing all of the necessary files to 3D print the EEV Arrow. Neutral CAD (STEP format) of the entire design is also included. Check the main page for more information.

Don't forget to buy a kit of parts!

EEV Arrow is licensed CC-BY-SA. You may use this design for commercial purposes. Please credit OpenFab PDX and link to https://openfabpdx.com

Here is a list of the different parts with their most recent revision number. Updated 1/14/2022.

  • Pod-R5
  • Knob-Base-R1
  • Handle(s)-R3
  • Neck-Top-R4
  • Neck-Base-Oleg-R3
  • Neck-Base-KK-R4
  • Body-noJack-R5
  • Body-withJack-R5
  • Bridge-Oleg-R2
  • Bridge-KK-R2
  • ChinRest-R2
  • ShoulderRest-R1

Finally -- a warning. This is an experimental design, and pushes the materials and print strength near their limits. The Pods are an extremely important part and Pod failure could result in pieces of plastic flying out from the instrument. If you lose tension in a single string, put on safety glasses and carefully loosen that string, remove and inspect the pod. You must print them solid. You must have good print settings. You must use good materials.

OpenFab makes no guarantees as to your results with this design. Please proceed with caution and protect your eyes.

This entry was posted in . Bookmark the permalink.