Become a patron on Patreon and get access to ALL the downloadable files plus early access to updated parts! Go to Patreon.
Print your own crazy tailpiece.
This tailpiece is designed using Autodesk Generative Design, and algorithm based design method that creates uniquely organic geometry to support a given load condition.
Tailpiece must be used with fine tuners and is not suitable for ball end strings without fine tuners.
There are two files here. One is for FFF printing and has flat surfaces on the bottom for bed adhesion. The other is for resin or powder printing, and does not have flat surfaces.
FFF print settings for 0.4mm nozzle:
- 3 or more perimeters
- 60% or higher infill
- PLA, ABS or stronger
Powder or Resin — use a rigid high strength material.
USE AT YOUR OWN RISK! This part is experimental and its performance is highly dependent on print material, settings, and quality. OpenFab makes NO guarantees whatsoever of the safety, performance, or reliability of this part.Â
When you purchase you’ll be redirected to Paypal to pay. Then, once you pay via Paypal, you’ll automatically be sent back here to the download page for the file. You will also receive an email with a summary of your purchase and a link to the download.